HOME > PRODUCTS > INDUCTIVE PROXIMITY SENSORS > P800 PROXSWITCH

P800 Proxswitch - DIN Style

The P800 Proxswitch is a DIN style inductive proximity sensor designed to detect shaft speed, shaft position, gate position, or object presence.

The P800 Proxswitch is a limit switch style proximity sensor, which works on the damped oscillator principle. No contact is made between the sensor and the object being monitored. The P800 will detect a ferrous object at a maximum distance of 1/2” (12 mm).

Three different sensor outputs are available, one with a changeover relay contact output and two with opto-isolated bilateral FET outputs (see specifications). All units are fully encapsulated with a built in 1/2" conduit entry and 6 foot cable leads. LED's indicate target detection (input and output).

Features:

• Detects Shaft Speed, Shaft/Gate Position or Object Presence

• Totally Sealed Construction (Submersible)

• 1/2" (12 mm) Detection Range - Ferrous Target

• LED Status Indication for Target Detection

• Integrated 1/2" NPT Conduit Entry

• Easy Installation with Whirligig® Sensor Mount

Product Questions? (309) 698-5611

or Email

Share |

Specifications
Downloads
Accessories
FAQ's
Images
Videos


	Note: The P800 Proxswitch is Available with Different Outputs		Literature:
			• Product Datasheet
	P8002V10FC Technical Specifications:
	• Typical Applications: Position and Object Monitoring		Technical:
	• Power Supply: 12 to 240 VDC / 24 to 240 VAC		• Product Manual (P8002)
	• Output: Voltage Free Changeover Relay 3A 240V Maximum		• Product Manual (P8003 & 4)
	• Output State: De-Energized (Off) with No Target
	• Relay Type: Mechanical
	• Maximum Input Speed: 5 Hz (300 ppm)
	• LED indication: Red (Input) and Green (Output) for Target Detection
	• Operating Temperature: -13 °F (-25 °C) to 158 °F (70 °C)
	• Sensing Range: 1/2" (12 mm) Ferrous, 5/16" (6 mm) Non-Ferrous
	• Enclosure: Nylon
	• Conduit Entry: 1/2 Inch NPT (Built Into Enclosure)
	• Cable - 6 ft. (2 m) 4 Conductor
	• Weight: 1 lbs.
	• Protection - IP67

	Approvals:
	• CSA Class II Div 1 Groups E, F & G (U.S. & Canada)







	P8003V10C and P8004V10C Technical Specifications:
	• Typical Applications: Speed Monitoring
	• Power Supply: 12 to 240 VDC / 24 to 240 VAC
	• Output: Opto-Isolated Bilateral FET 120 VAC/VDC 100 mA Maximum
	• Output State: P8003V10C - Energized (On) with No Target
	P8004V10C - De-Energized (Off) with No Target
	• Relay Type: Solid State
	• Maximum Input Speed: 100 Hz (6,000 ppm)
	• LED indication: Red (Input) and Green (Output) for Target Detection
	• Operating Temperature: -13 °F (-25 °C) to 158 °F (70 °C)
	• Sensing Range: 1/2" (12 mm) Ferrous, 5/16" (6 mm) Non-Ferrous
	• Enclosure: Nylon
	• Conduit Entry: 1/2 Inch NPT (Built Into Enclosure)
	• Cable - 6 ft. (2 m) 4 Conductor
	• Weight: 1 lbs.
	• Protection - IP67

	Approvals:
	• CSA Class II Div 1 Groups E, F & G (U.S. & Canada)







	Part Numbers and Accessories:
	• P8002V10FC ~ P800 Proxswitch (Contact Closure Version)
	• P8003V10C ~ P800 Proxswitch (Opto-Isolated Bilateral FET Version)
	• P8004V10C ~ P800 Proxswitch (Opto-Isolated Bilateral FET Version)
	• WG1-4B-4 ~ Whirligig® Shaft Sensor Mount
	• MAG2000 ~ Mag-Con™ Magnetic Connector for Whirligig
	• SM2 ~ SpeedMaster™ Sensor Testing Device
	• TACH3V5 ~ Tacho Display


	Literature:
	• Product Datasheet

	Technical:
	• Product Manual (P8002)
	• Product Manual (P8003 & 4)

	Note: Product manuals for older part numbers can be
	found under the Technical Support area.


			Whirligig® - Shaft Sensor Mount The Whirligig is a fully guarded target for easy mounting of motion sensors. It is a universal shaft sensor mount suitable for all industry standard cylindrical or DIN style inductive sensors. The Whirligig is available with 1, 2, 4 or 8 pulse targets, and attaches to the machines shaft by a 1/2 in. tapped hole or magnetically using the Mag-Con™ adapter. See Whirligig










			SpeedMaster™ Speed Switch Tester For speed monitoring applications, the SpeedMaster™ with Pulse Pilot is the only device that accurately tests the calibration, alarm and shutdown features of the sensor while installed on the machine shaft. See SpeedMaster









			Conduit Adapter The A34NPT conduit adapter is used to connect the metric threaded body of the sensor to 1/2 inch NPT conduit.








			Tacho Display The Tacho is a low cost electronic display which can be user programmed to indicate speed, distance or time intervals. See Tacho


	TBD









Enlarge	Enlarge	Enlarge	Enlarge


	No videos currently available for this product.

Material Handling

Electronics