HOME > PRODUCTS > INDUCTIVE PROXIMITY SENSORS > P100 PROXSWITCH

P100 Proxswitch - 18 mm

The P100 Proxswitch is an 18 mm inductive proximity sensor designed to detect shaft speed, shaft position, gate position, or object presence.

The P100 Proxswitch is a limit switch style proximity sensor, which works on the damped oscillator principle. No contact is made between the sensor and the object being monitored. The P100 will detect a ferrous object at a maximum distance of 5/16” (8 mm).

Two different sensor outputs are available. One with a normally closed output, and the other with a normally open output. Both units are fully encapsulated, have 6 foot cable leads and include LED’s to indicate target detection.

Features:

• Detects Shaft Speed, Shaft/Gate Position or Object Presence

• No Contact Monitoring

• Totally Sealed Construction (Submersible)

• 5/16" (8 mm) Detection Range - Ferrous Target

• Easy Installation with Whirligig® Sensor Mount

Product Questions? (309) 698-5611

or Email

Share |

Specifications
Downloads
Accessories
FAQ's
Images
Videos


	Note: The P100 Proxswitch is Available in Two Models (2 & 4 Wire)		Literature:
			• Product Datasheet
	P100 Proxswitch Technical Specifications (2 Wire):
	• Power Supply: 24 to 240 VAC/VDC (Universal Voltage Supply)		Technical:
	• Output: Triac		• Product Manual (2 Wire)
	• Switching Capacity: 100 mA Maximum		• Product Manual (4 Wire)
	• Output: P1001V10C (Energized - On), P1002V10C (De-Energized - Off)
	• Maximum Input Speed: 200 Hz
	• Leakage Current: < 1 mA
	• Voltage Drop: 5.5 Volts Maximum
	• LED indication: Red (Input) = Target Sensed
	• Operating Temperature: -13 °F (-25 °C) to 158 °F (70 °C)
	• Sensing Range: 5/16" (8 mm) Ferrous, 1/4" (6 mm) Non-Ferrous
	• Enclosure: Nylon - ISO Threaded M18 x 1 mm
	• Cable - 6 ft. (2 m) 2 Conductor
	• Protection - IP65

	Approvals:
	• CSA Class II Div 1 Groups E, F & G (U.S. & Canada)
	• ATEX Version Available







	P100 Proxswitch Technical Specifications (4 Wire):
	• Power Supply: 10 to 30 VDC
	• Output: User Selectable (NPN / PNP Transistor)
	• Switching Capacity: 30 VDC 100 mA Maximum
	• Output State: User Selectable (On / Off)
	• Maximum Input Speed: 200 Hz
	• LED indication: Red (Input) = Target Sensed
	• Operating Temperature: -13 °F (-25 °C) to 158 °F (70 °C)
	• Sensing Range: 5/16" (8 mm) Ferrous, 1/4" (6 mm) Non-Ferrous
	• Enclosure: Nylon - ISO Threaded M18 x 1 mm
	• Cable - 6 ft. (2 m) 4 Conductor
	• Protection - IP65

	Approvals:
	• CSA Class II Div 1 Groups E, F & G (U.S. & Canada)
	• ATEX Version Available







	Part Numbers and Accessories:
	• P1001V10C ~ P100 Proxswitch (Normally Closed Output - 2 Wire)
	• P1002V10C ~ P100 Proxswitch (Normally Open Output - 2 Wire)
	• P1001V34C ~ P100 Proxswitch (NPN/PNP Transistor - 4 Wire)
	• A12NPT ~ 1/2" NPT Conduit Adapter
	• WG1-4B-4 ~ Whirligig® Shaft Sensor Mount
	• MAG2000 ~ Mag-Con™ Magnetic Connector for Whirligig
	• TACH3V5 ~ Tacho Display


	Literature:
	• Product Datasheet

	Technical:
	• Product Manual (2 Wire)
	• Product Manual (4 Wire)

	Note: Product manuals for older part numbers can be
	found under the Technical Support area.


			Whirligig® - Shaft Sensor Mount The Whirligig is a fully guarded target for easy mounting of motion sensors. It is a universal shaft sensor mount suitable for all industry standard cylindrical or DIN style inductive sensors. The Whirligig is available with 1, 2, 4 or 8 pulse targets, and attaches to the machines shaft by a 1/2 in. tapped hole or magnetically using the Mag-Con™ adapter. See Whirligig










			Conduit Adapter The A12NPT conduit adapter is used to connect the metric threaded body of the sensor to 1/2 inch NPT conduit.








			Tacho Display The Tacho is a low cost electronic display which can be user programmed to indicate speed, distance or time intervals. See Tacho


	Can the P100 be wired directly to a motor starting coil?
	No, due to the 100 mA maximum current capacity the P100 should not be wired to the motor's starting coil.









	Enlarge	Enlarge


	No videos currently available for this product.

Material Handling

Electronics

P100 Proxswitch - 18 mm

The P100 Proxswitch is an 18 mm inductive proximity sensor designed to detect shaft speed, shaft position, gate position, or object presence.

The P100 Proxswitch is a limit switch style proximity sensor, which works on the damped oscillator principle. No contact is made between the sensor and the object being monitored. The P100 will detect a ferrous object at a maximum distance of 5/16” (8 mm).

Two different sensor outputs are available. One with a normally closed output, and the other with a normally open output. Both units are fully encapsulated, have 6 foot cable leads and include LED’s to indicate target detection.

Features:

• Detects Shaft Speed, Shaft/Gate Position or Object Presence

• No Contact Monitoring

• Totally Sealed Construction (Submersible)

• 5/16" (8 mm) Detection Range - Ferrous Target

• Easy Installation with Whirligig® Sensor Mount